Difference between revisions of "Unsafe Schools Report"

From EDgearWiki
Jump to navigationJump to search
(Created page with "==='''Video How-To'''=== ==='''How-To'''=== #Log into WebPams page #On the left, click on '''Discipline''' #Under '''Discipline''', click on the arrow to the left of the w...")
 
 
(20 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
==='''Video How-To'''===
+
__NOTOC__
 +
'''This report gives an incident comparison of the current school year and the previous school year.'''
  
 +
==Menu Location==
  
 +
'''Discipline''' > '''List''' > '''Unsafe Schools Report'''
  
 +
==Setup Options==
  
 +
[[File:unsafesetup.png]]
  
−
==='''How-To'''===
+
'''Year''' - Defaults to the current year. A prior year may be accessed by clicking in the field and making the appropriate selection from the drop down list.
  
 +
'''District''' - Default value is based on the user's security settings. It will be limited to their district only.
  
−
#Log into WebPams page
+
'''School''' - Default value is based on the user's security settings. If the user is assigned to a school, the school default value will be their school site code.
−
#On the left, click on '''Discipline'''
+
 
−
#Under '''Discipline''', click on the arrow to the left of the word '''List'''
+
'''Enrollment''' - Defaults to Total Enrollment. Click on the down arrow to make the selection of October 1st.
−
#Click on '''Unsafe Schools Report''' that appears under List
+
 
−
#Once the setup box appears, the following data should be set appropriately to receive accurate data:
+
'''Active Only''' - Click in the square to the left of Active  Only for this selection or un-check to see the report for all students that have attended the school during the year.
−
#*'''Year''' should be set to the school year in which the report data need to be collected from
+
 
−
#*'''District and School''' should be defaulted based on the users security information
+
'''Active Date''' - Date defaults to today`s date. This date may be changed by clicking on the down arrow(s) or by clicking on the calendar to the right of the line.
−
#'''Enrollment''': Defaults to Total Enrollment. Click on the down arrow to make the selection of October 1st.
+
 
−
#'''Active Only''': Click in the square to the left of Active  Only for this selection or un-check to see the report for all students that have attended the school during the year.
+
'''Show''' - Click the radio button to make the selection of either All, Sped Only, or Non-Sped.
−
#'''Active Date''': Date defaults to today`s date. This date may be changed by clicking on the down arrow(s) or by clicking on the calendar to the right of the line.
+
 
−
#'''Show''': Click the radio button to make the selection of either All, Sped Only, or Non-Sped.
+
'''Show''' - Click the radio button to make the selection of either All, 504 Only, or Non-504.
−
#'''Show''': Click the radio button to make the selection of either All, 504 Only, or Non-504.
+
 
−
#Click the '''OK''' button to begin the '''Unsafe Schools Report'''.
+
'''OK''' - Click to continue.
 +
 
 +
To find definitions for standard setup values, follow this link: [[Standard Setup Options]].
 +
 
 +
==Main==
 +
 
 +
[[File:unsafemain.png]]
 +
 
 +
===Column Headers===
 +
 
 +
'''C''' - Number represents the incidents
 +
 
 +
'''U''' - Unsafe schools criteria
 +
 
 +
'''SIS Incident''' - SIS incident description
 +
 
 +
'''A''' - Unsafe schools criteria A (Limit 1%)
 +
 
 +
'''B''' - Unsafe schools criteria B (Limit 4%)
 +
 
 +
'''C''' - Unsafe schools criteria C (Limit 6%)
 +
 
 +
'''X''' - Unsafe schools  Does Not Meet Criteria  (No limit)
 +
 
 +
'''ISS''' - The current school year ISS: All of the incidents are listed for this year
 +
 
 +
'''PY ISS''' - Prior year ISS: All of the incidents are listed for this year
 +
 
 +
'''OSS''' - The current school year OSS: All of the incidents are listed for this year
 +
 
 +
'''PY OSS''' - Prior year OSS: All of the incidents are listed for this year
 +
 
 +
'''SIS1''' - The current school year SIS1: All of the incidents are listed for this year
 +
 
 +
'''PY SIS1''' - Prior year SIS1: All of the incidents are listed for this year
 +
 
 +
'''SIS2''' - The current school year SIS2: All of the incidents are listed for this year
 +
 
 +
'''PY SSI2''' - Prior year SIS2: All of the incidents are listed for this year
 +
 
 +
'''SIS3''' - The current school year SIS3: All of the incidents are listed for this year
 +
 
 +
'''PY SIS3''' - Prior year SIS3: All of the incidents are listed for this year
 +
 
 +
'''SIS4''' - The current school year SIS4: All of the incidents are listed for this year
 +
 
 +
'''PY SSI4''' - Prior year SIS4: All of the incidents are listed for this year
 +
 
 +
'''SIS5''' - The current school year SIS5: All of the incidents are listed for this year
 +
 
 +
'''PY SSI5''' - Prior year SIS5: All of the incidents are listed for this year
 +
 
 +
'''SIS6''' - The current school year SIS6: All of the incidents are listed for this year
 +
 
 +
'''PY SIS6''' - Prior year SIS6: All of the incidents are listed for this year
 +
 
 +
'''SIS7''' - The current school year SIS7: All of the incidents are listed for this year
 +
 
 +
'''PY SSI7''' - Prior year SIS7: All of the incidents are listed for this year
 +
 
 +
To find definitions of commonly used column headers, follow this link: [[Common Column Headers]].
 +
 
 +
==Bottom==
 +
 
 +
[[File:unsafebottom.png]]
 +
 
 +
'''Setup''' - Click to go back to the Setup box.
 +
 
 +
[[Standard Print Options | '''Print''']] - This will allow the user to print the report.
 +
 +
'''Help''' - Click to view written instructions and/or videos.
 +
 
 +
 
 +
 
 +
----
 +
[[Discipline|'''Discipline''' Main Page]]
 +
----
 +
[[WebPams|'''JCampus''' Main Page]]

Latest revision as of 10:04, 31 July 2023

This report gives an incident comparison of the current school year and the previous school year.

Menu Location

Discipline > List > Unsafe Schools Report

Setup Options

Unsafesetup.png

Year - Defaults to the current year. A prior year may be accessed by clicking in the field and making the appropriate selection from the drop down list.

District - Default value is based on the user's security settings. It will be limited to their district only.

School - Default value is based on the user's security settings. If the user is assigned to a school, the school default value will be their school site code.

Enrollment - Defaults to Total Enrollment. Click on the down arrow to make the selection of October 1st.

Active Only - Click in the square to the left of Active Only for this selection or un-check to see the report for all students that have attended the school during the year.

Active Date - Date defaults to today`s date. This date may be changed by clicking on the down arrow(s) or by clicking on the calendar to the right of the line.

Show - Click the radio button to make the selection of either All, Sped Only, or Non-Sped.

Show - Click the radio button to make the selection of either All, 504 Only, or Non-504.

OK - Click to continue.

To find definitions for standard setup values, follow this link: Standard Setup Options.

Main

Unsafemain.png

Column Headers

C - Number represents the incidents

U - Unsafe schools criteria

SIS Incident - SIS incident description

A - Unsafe schools criteria A (Limit 1%)

B - Unsafe schools criteria B (Limit 4%)

C - Unsafe schools criteria C (Limit 6%)

X - Unsafe schools Does Not Meet Criteria (No limit)

ISS - The current school year ISS: All of the incidents are listed for this year

PY ISS - Prior year ISS: All of the incidents are listed for this year

OSS - The current school year OSS: All of the incidents are listed for this year

PY OSS - Prior year OSS: All of the incidents are listed for this year

SIS1 - The current school year SIS1: All of the incidents are listed for this year

PY SIS1 - Prior year SIS1: All of the incidents are listed for this year

SIS2 - The current school year SIS2: All of the incidents are listed for this year

PY SSI2 - Prior year SIS2: All of the incidents are listed for this year

SIS3 - The current school year SIS3: All of the incidents are listed for this year

PY SIS3 - Prior year SIS3: All of the incidents are listed for this year

SIS4 - The current school year SIS4: All of the incidents are listed for this year

PY SSI4 - Prior year SIS4: All of the incidents are listed for this year

SIS5 - The current school year SIS5: All of the incidents are listed for this year

PY SSI5 - Prior year SIS5: All of the incidents are listed for this year

SIS6 - The current school year SIS6: All of the incidents are listed for this year

PY SIS6 - Prior year SIS6: All of the incidents are listed for this year

SIS7 - The current school year SIS7: All of the incidents are listed for this year

PY SSI7 - Prior year SIS7: All of the incidents are listed for this year

To find definitions of commonly used column headers, follow this link: Common Column Headers.

Bottom

Unsafebottom.png

Setup - Click to go back to the Setup box.

Print - This will allow the user to print the report.

Help - Click to view written instructions and/or videos.


Discipline Main Page

JCampus Main Page

Retrieved from EDgear Wiki