Picture Master

From EDgearWiki
Jump to navigationJump to search

Video How-to

Picture Master video

Picture Master

This program will allow you to upload pictures for your school or edit pictures that need to be replaced. This is completed from a data source (disc, etc.) from the photographer. Pictures in the data source must be identified by the student ID number for this update program to work.


Under Student Master/Entry select Loaders, then select Picture Master.


Setup Box Options

To find definitions for standard setup values, follow this link: Standard Setup Options.

For other set up values not listed in the standard set up list:

  • Update: - Student/Parent or Staff - choose whether you are updating or adding pictures for student/parents or staff
  • Only Students with no Pictures - place a check to only show students that do not have existing pictures displayed


Click OK to move to the next screen.


To Update Existing Student Pictures One at a Time, Use the Following Steps

The screen will display two sections. Student or staff names meeting the criteria set in the setup box will be listed on the left. The right side of the screen will display the current picture. You will select/choose a picture to replace the existing picture using the Choose File button.

  1. Click the Choose File button to navigate to the location of the pictures file.
  2. Select the picture based on the student ID. The new picture will display above the Choose File button.
  3. Click the Update Picture button. The current picture will be changed.


To Import Pictures in Mass, Use the Following Steps

  1. After clicking OK on the setup box, click the Load From CD/Zip button.
  2. Click the Choose Files button, then choose the files you wish to upload to the Picture Master. You can choose up to 4000 files, or choose a zip file that contains all files. Pictures must be named by the student ID number (7 digits) followed by .jpg. To choose all the pictures in the file, use the Control - "A" key board command. NOTE: The program will now deal with picture files that are missing the leading zeros. If the student number is "0012345", the program will find the correct file if it has a file name of "12345.jpg".
  3. After selecting the pictures in the file to import, click "Open".
  4. Then click "Save". You will be notified when the pictures are imported.
  5. Navigate back to Student Master to check that the pictures are attached to the students.
Note: Do not use any outside compression software such as WinZip, 7-Zip, WinRar, etc. if saving the picture file to your computer.




Resources

Moving Lifetouch Images to JCampus: A guide on importing pictures from the new Lifetouch portal into JCampus.

Retrieved from EDgear Wiki