Load Student Course Requests

Video

Load Student Course Requests video

Accessing the Load Student Course Requests Program

The Load Student Course Requests program can be accessed via the following path: JCampus -> Scheduling -> Entry -> Load Student Course Requests

Load Requests Setup Options

Year: Select the appropriate school year. For this program, select the Year for the upcoming school year.

District: Default value is based on your security settings. You will be limited to your district only.

School: Default value is based on your security settings. If you are assigned to a school, the school default value will be your school site code. You will not be able to change this value. If you are a supervisor or other district office employee with access to the Student Information System, you will be able to run programs for one school, a small group of schools, or all schools in your district

Stu Grades: Select the grade level(s) of the students that need course requests.

Active Only: Check to include only those students who were active as of the date indicated in the date field below the Active Only button.

Include Scheduled Requests: Check this option to show student requests that have already been scheduled. Leave unchecked to view only unscheduled requests.

Allow Multiyear Requests: Check this option to enter student requests up to five years in advance.

Skip Obsolete Courses: Check this option to exclude courses that are marked as obsolete in the course selection list.

Course Grades: Click in this field to get a list of grades. Click on the grades in the list to limit the course selection list to those grade levels.

Create Courses From Master Schedule: Check this option to limit the course selection list to only those courses in the master schedule.

Show Master Schedule Comments: Check this option if the comments entered in the Master Schedule Editor need to be displayed in the course list.

Course Long Name Options: Complete this section regarding the options for displaying the Long Course Names:

• Display Long Course Names: Check this option if you want the Long Course Names" to be displayed in the course pick list.
• Default Language: Click on the drop-down arrow in the language selection field to choose the language to use to display the Long Course Name.

Filters

Spec Codes: This field will filter the list based on Special Codes. Special Codes must have been entered into the Student Master record for students. Leave blank if all special codes are to be included into the report. Otherwise click in the field to right to get a list of Special Codes to choose from.

Programs: This field will filter the list based on Programs. Programs must have been entered into the Student Master record for students. Leave blank if all Program codes are to be included into the report. Otherwise click in the field to right to get a list of Program Codes to choose from.

Exclude Special Codes: Leave blank if all special codes are to be excluded into the report. Otherwise click in the field to the right of Exclude Special Codes to select the desired special code(s) to exclude.

Clubs Extracurricular activities in which students may participate. Leave blank if all clubs are to be included into the report. Otherwise click in the field to the right of Clubs to select the desired club(s) to view.

Sports Leave blank if all sports are to be included into the report. Otherwise click in the field to the right of Sports to select the desired sport(s) to view.

Counselor Responsible for scheduling, testing, student grades and transcripts. Leave blank if all counselors are to be included into the report. Otherwise click in the field to the right of Counselor to select the desired counselor(s) to view.

Teams This selection should only be used if your school is using Team Scheduling. Leave blank if all team names are to be included into the report. Otherwise click in the field to the right of Teams to select the desired Teams(s) to view.

Show: All, Sped Only, Non Sped: Check the appropriate option button to filter the students as follows:

• All: This options will show All student - both Special Education and Regular Education.
• Sped Only: This option will show only the Special Education students.
• Non Sped: This option will show only the Regular Education students.

Click the Ok button when the setup box is correct.

Note: The Setup Options can be revised at any time by clicking on the Setup button at the bottom of the screen and making changes to the appropriate options.

Top of Page

Loading Course Requests for a Single Student

Finding the Student

• Find: Use the "Find" button at the bottom of the screen to bring up the Find box and search for the specific student.
• Scrolling: Use the "Prev" or "Next" button at the bottom of the screen to scroll through the list of students.

Loading the Course Requests

• Load Student: Use the "Load Student" button at the bottom of the screen to bring up the form below to load the course requests.
  

  Load Requests For The Current Student Form

Select Standard/Priority Codes

The user can select one, multiple, or all of the following options:

• All Courses(*): Select this option to load "*" standard courses to students.
• Female Courses (F): Select this option to load "F" standard courses to females.
• Male Courses (M): Select this option to load "M" standard courses to males.
• 1 Elective Courses: Select this option to load priority code 1 courses to students.
• 2-5 Elective Courses: Select this option to load priority codes 2-5 courses to students.
• 6-9 Elective Courses: Select this option to load priority codes 6-9 courses to students.

SELECT COURSES (overrides standard/priority selections)

Clicking on this button will bring up the Course List and will allow the user to select one or more courses to add as requests to the selected students.

Select Year(s) To Load

The user can select one or more of the school years displayed.

Click on the "OK" button to process the selected operations and close the window or click on the "Cancel" button to cancel the operations and close the window.

• Manual Procedure: Click on a course in the right panel of the screen and it will appear as a request in the left panel. (See below)
  

Manually Load Student Course Request

Top of Page

Loading Course Requests for Multiple Students

Load School: Auto loads requests for all students for the selected grade(s)

Load Requests For All Students Form

Select Standard/Priority Codes

The user can select one, multiple, or all of the following options:

• All Courses(*): Select this option to load "*" standard courses to students.
• Female Courses (F): Select this option to load "F" standard courses to females.
• Male Courses (M): Select this option to load "M" standard courses to males.
• 1 Elective Courses: Select this option to load priority code 1 courses to students.
• 2-5 Elective Courses: Select this option to load priority codes 2-5 courses to students.
• 6-9 Elective Courses: Select this option to load priority codes 6-9 courses to students.

SELECT COURSES (overrides standard/priority selections)

Clicking on this button will bring up the Course List and will allow the user to select one or more courses to add as requests to the selected students.

Select Year(s) To Load

The user can select one or more of the school years displayed.

Click on the "OK" button to process the selected operations and close the window or click on the "Cancel" button to cancel the operations and close the window.

Top of Page

Deleting Course Requests for a Student

1. To delete a single request, click the red cell to the left of the course
2. To delete auto loaded requests for the school:
   1. Click on the menu item "Action"
   2. A menu will drop down. Select the option "Delete All Auto Loaded Unsched Requests For School". All auto loaded and unscheduled requests will be deleted
3. To delete unscheduled requests for the selected student only:
   1. Click on the menu item "Action"
   2. A menu will drop down. Select the option "Delete All Unsched Requests For Student"

Top of Page

Alternate Course Requests

Courses can be specified as "Alternate" courses, that is, courses that can be scheduled if the primary courses cannot be scheduled. There are two types of Alternate Courses:

1. Parent/Alternative: In this case, the alternate course is a substitution for a specific 'parent' course.
   1. Specify the Parent course.
   2. Specify the Alternative course. (A "Parent" course may have multiple "Alternative" courses)
2. Generic Alternative: In this case, the alternative course can be substituted for any course in Transcript Groups 8 or 9.

NOTE: The Automatic Scheduler will NOT try to schedule the Parent/Alternative alternate courses but WILL attempt to schedule the Generic Alternative courses if that option is selected in the Automatic Scheduler setup box.

Creating Parent/Alternative Course Requests

Parent/Alternative: Step 1

Create the "Parent" Course for the Parent/Alternative Setup

Parent/Alternative: Step 2

Create the "Alternative" Course to a Corresponding "Parent" Course

Creating Generic Alternative Course Request

Create a "Generic Alternative" (GA) Course Request

Top of Page

Additional Information

Additional information has been added to the Load Student Course Requests screen to further assist the counselors and others with determining the courses to request for the students.

Additional Information to the Load Student Course Requests program

The following buttons are available:

SPED: Clicking on this button will bring up the Special Education information for the student. If it is NOT colored, then no information is available.

504: Clicking on this button will bring up the 504 information for the student. If it is NOT colored, then no information is available.

LEP: Clicking on this button will bring up the LEP information for the student. If it is NOT colored, then no information is available.

Health: Clicking on this button will bring up the Health information for the student. If it is NOT colored, then no information is available.

Also, the following information is also available:

Diploma Path: If available, the Diploma Path code and description will be displayed.

Career Option: If available, the Career Option code and description will be displayed.

Cluster: If available, the Career Cluster code and description will be displayed.

Concentration: If available, the Career Area of Concentration code and description will be displayed.

Top of Page

Print Student Course Requests

Use the "PrtStu" button at the bottom of the screen to print the student(s) Course Request Forms

PrtStu: Clicking on the "PrtStu" button displays the Print Course Request Forms setup/print box.

Print Course Request Form

Print Options

• Include Scheduled Requests: Select this option to show both scheduled and unscheduled requests. Leave unchecked to show unscheduled requests only.
• Print Course Offerings: Select this option to print all course offerings at the end of each student request form. The Master Schedule must exist for the base year.
• Print Stu Short Form: Select this option to print a student short form with each student request sheet.
• Course Listing Layout: Select to have the course listing printed in a horizontal or vertical format.

HomeRoom and Grade Range

• Use Homeroom Order: Select to have the forms printed by HomeRoom Teacher and then alpha by student within the homeroom.
• Homeroom Teacher: Click in the Homeroom Teacher field to select the Homeroom Teachers to print.
• Grade: Click in the Grade field to further filter the grade level for the students in the selected homerooms.

Student Selection

• Special Codes: This field will filter the list based on Special Codes. Special Codes must have been entered into the Student Master record for students. Leave blank if all special codes are to be included into the report. Otherwise click in the field to right to get a list of Special Codes to choose from.
• Programs: This field will filter the list based on Programs. Programs must have been entered into the Student Master record for students. Leave blank if all Program codes are to be included into the report. Otherwise click in the field to right to get a list of Program Codes to choose from.
• Select Student(s): Click in this field to select the student or students to print. NOTE: In some cases, there be no students to choose from due to the choices in the previous fields. For instance, if select homeroom teacher "A" and grade "10", but there are no 10th grade students in teacher A's homeroom, there will be no students in the list. The following field all combine to determine the students listed in the Select Student(s) field: Homeroom Teacher, Grade, Special Codes, and Programs.

Year and Credit Options

• Add Alt Course Credit to Total Credits: Select this option to add the Alternate course credits to the Total credits for the student.
• Print Year 1516: Print the information for school year 1516. (Current school year plus 1).
• Print Year 1617: Print the information for school year 1617. (Current school year plus 2).
• Print Year 1718: Print the information for school year 1718. (Current school year plus 3).
• Print Year 1819: Print the information for school year 1819. (Current school year plus 4).

Comment

• Text Box: Type in any comment you want to appear on the Course Request Forms.
• Print Comments: Select this option if you want the Comments in the above Text Box to appear on the Course Request Forms.

Buttons At Bottom of Form

• Print Forms: Clicking on this button will print the Course Request Forms based on the above specifications.
• Cancel: Cancels the PrtStu operation and closes the window.

Top of Page

Course Request Alert

When a course is loaded where the student already has grades posted and/or a transcript record, the user will get the following warning message advising them of this fact. (See below)

Warning Message for Duplicate Course

If the user clicks "Cancel" on the warning message, the warning will disappear and the selected course will NOT be added to the Request List. If the user clicks "OK" on the warning message, a screen will pop up to display the grades and/or the transcript information. (See below)

Grades and Transcript Information

If the user clicks "Close" on the Grades/Transcript display, the window will close and the selected course will NOT be added to the Request List. If the user clicks "OK" on the warning message, the window will close and the selected course WILL be added to the Request List.

Top of Page

Action Menu

There are several items on the Action Menu that may assist with the Load Student Course Requests Program

Action Menu

Gear Box: The iGear Box has tools that can provide relevant information when making decisions regarding scheduling. Using iGear

iGear Menu

Master Schedule: Clicking this will display the Master Schedule.

Graduation Template Scheduler: Clicking this will bring up the Graduation Template Scheduler for the student currently being displayed.

Delete All Unsched Requests for Student: Clicking this option will delete all the unscheduled requests for the displayed student. The user will get a confirmation message prior to the actual deletion.

Delete All Auto-Loaded Unsched Requests For School: Based on the options selected on the following screen, all auto-loaded, unscheduled requests will be deleted.

Delete Auto-Loaded Requests Options

• Select the grade(s).
• Select the year(s).
• Click "OK" to continue.
• The user will get a confirmation screen prior to the actual deletion.

Top of Page

Buttons at the Bottom of the Screen

Help: Takes the user to the Scheduling help screen.

MSched: Displays the Master Schedule selection screen.

Print: To find the print instructions, follow this link: Standard Print Options.

Top of Page

Last updated: 2016.01.05 (rd)

---

JCampus / Scheduling