Difference between revisions of "RTI Create Tiers, Categories, and Interventions"

From EDgearWiki
Jump to navigationJump to search
 
(23 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
−
Before entering RTI information on students, Tiers, Categories, and Interventions need to be configured for the district or school site.   
+
The first step in the RTI Editor is to configure the selection of Tiers, Categories, and Interventions for the district or school site.   
 
* Consult with your District Coordinator for further information on whether these are set by the district or school level.
 
* Consult with your District Coordinator for further information on whether these are set by the district or school level.
−
* Click '''[http://wiki.edgear.net/wiki/w/images/5/5f/RTI_Intervention_Codes.pdf RTI Intervention Codes]''' to see a list of '''Tier''', '''Category''', and '''Intervention''' choices.
 
−
*A selection document to help guide the District/School in Tier, Category, and Intervention selection is available by clicking on the following link: '''[http://wiki.edgear.net/wiki/w/images/b/be/RTI_Selection_Code_Selection_Document.pdf RTI Code Selection Document]'''.
 
  
−
===Video===
+
===Getting Started===
−
[[media:SBLC-CreateRTIRef.mov|Getting Ready to Create a New RTI Referral video]]
 
  
−
===Getting Started===
+
*On the left navigation screen, select '''SBLC''', then under '''Entry''', select '''SBLC/RTI Editor'''.
−
#On the left navigation screen, select '''SBLC''', then under '''Entry''', select '''SBLC/RTI Editor'''.
+
*A setup box will be displayed.  Select the '''Year''', '''District''', and '''School'''.
−
#A setup box will be displayed.  Select the '''Year''', '''District''', and '''School'''.
+
*'''Note''' - Selecting '''School''' "700" will mean the user is able to select any student from any school site.
−
#*'''Note''':  Selecting '''School''' "700" will mean the user is able to select any student from any school site.
+
*Click the '''OK''' button to bring up the '''SBLC/RTI Editor''' screen.
−
#Click the '''OK''' button to bring up the '''SBLC/RTI Editor''' screen.
+
*On the '''SBLC/RTI Editor''' screen, click on the '''Action''' button at the top right of the window.
−
#On the '''SBLC/RTI Editor''' screen, click on the '''Action''' button at the top right of the window.
+
*Select '''RTI Tier-Cat Editor'''
−
#Select '''RTI Tier-Cat Editor'''
 
  
 
===Tier/Category/Intervention Configuration===
 
===Tier/Category/Intervention Configuration===
−
#An entry screen will appear. At the bottom, verify, or edit the '''School'''.
 
−
#*If creating for a district wide selection, set the '''School''' to "700".
 
−
#*If creating for a single school site, set the '''School''' to the desired school site.
 
−
#Use the top blank line to insert a '''Tier''', '''Category''', and '''Intervention'''.
 
−
#Click in the '''Tier''' cell and select the appropriate tier number (1, 2, or 3).
 
−
#Click in the '''Category''' cell and make your selection from the drop down list.
 
−
#Click in the '''Intervention''' cell and make your selection from the drop down list.
 
−
#Click the '''Save''' cell at the end of the top line to save the new tier/category/intervention set.
 
−
#A new line will be displayed.
 
−
#Repeat for each additional tier/category/intervention set.
 
−
#An intervention can be associated with multiple Tiers and Categories.
 
−
#*Ex... "1038 FINS APPEARED" can be in both Tier 2 and 3 for the Categories of "Behavior" and "Child Welfare & Attendance".
 
−
#*A row will be added for each Tier and Category combination.
 
−
# To print the listing, click the '''Print''' button.
 
  
 +
An entry screen will appear. At the bottom, verify, or edit the '''School'''.
 +
*If creating for a district wide selection, set the '''School''' to "700".
 +
*If creating for a single school site, set the '''School''' to the desired school site.
  
 +
Use the top blank line to insert a '''Tier''', '''Category''', and '''Intervention'''.
 +
*Click in the '''Tier''' cell and select the appropriate tier number (1, 2, or 3).
 +
*Click in the '''Category''' cell and make your selection from the drop down list.
 +
*Click in the '''Intervention''' cell and make your selection from the drop down list.  The codes and descriptions will appear for you to choose from.
 +
*An intervention can be associated with multiple Tiers and Categories. Ex: "1038 FINS APPEARED (Family In Need of Services)" can be in both Tier 2 and 3 for the Categories of "Behavior" and "Child Welfare & Attendance". A row will be added for each Tier and Category combination.
 +
*Click the '''Save''' cell at the end of the top line to save the new tier/category/intervention set. A new line will be displayed.
  
 +
Repeat for each additional tier/category/intervention set.
  
 +
To print the listing, click the '''Print''' button. To find the print instructions, follow this link: [[Standard Print Options]].
  
 
----
 
----
−
[[SBLC/RTI|'''SBLC/RTI''' Main Page]]
+
:[[SBLC/RTI|'''SBLC/RTI''' Main Page]]
−
:[[SBLC/RTI_Editor|'''SBLC/RTI Editor''' Page]]
+
 
 +
::[[SBLC/RTI_Editor|'''SBLC/RTI Editor''' Page]]

Latest revision as of 10:45, 6 June 2024

The first step in the RTI Editor is to configure the selection of Tiers, Categories, and Interventions for the district or school site.

  • Consult with your District Coordinator for further information on whether these are set by the district or school level.

Getting Started

  • On the left navigation screen, select SBLC, then under Entry, select SBLC/RTI Editor.
  • A setup box will be displayed. Select the Year, District, and School.
  • Note - Selecting School "700" will mean the user is able to select any student from any school site.
  • Click the OK button to bring up the SBLC/RTI Editor screen.
  • On the SBLC/RTI Editor screen, click on the Action button at the top right of the window.
  • Select RTI Tier-Cat Editor

Tier/Category/Intervention Configuration

An entry screen will appear. At the bottom, verify, or edit the School.

  • If creating for a district wide selection, set the School to "700".
  • If creating for a single school site, set the School to the desired school site.

Use the top blank line to insert a Tier, Category, and Intervention.

  • Click in the Tier cell and select the appropriate tier number (1, 2, or 3).
  • Click in the Category cell and make your selection from the drop down list.
  • Click in the Intervention cell and make your selection from the drop down list. The codes and descriptions will appear for you to choose from.
  • An intervention can be associated with multiple Tiers and Categories. Ex: "1038 FINS APPEARED (Family In Need of Services)" can be in both Tier 2 and 3 for the Categories of "Behavior" and "Child Welfare & Attendance". A row will be added for each Tier and Category combination.
  • Click the Save cell at the end of the top line to save the new tier/category/intervention set. A new line will be displayed.

Repeat for each additional tier/category/intervention set.

To print the listing, click the Print button. To find the print instructions, follow this link: Standard Print Options.

SBLC/RTI Main Page
SBLC/RTI Editor Page
Retrieved from EDgear Wiki